|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
STP11NM60 - STP11NM60FP STB11NM60 - STB11NM60-1 N-channel 650V @ TJmax - 0.4 - 11A TO-220/FP/D2PAK/I2PAK MDmeshTM Power MOSFET General features www..com Type VDSS (@TJ=TJmax) 650V 650V 650V 650V RDS(on) <0.45 <0.45 <0.45 <0.45 ID 3 STP11NM60 STP11NM60FP STB11NM60 STB11NM60-1 11A 11A 11A 11A TO-220 1 2 3 1 2 TO-220FP High dv/dt and avalanche capabilities 100% avalanche tested Low input capacitance and gate charge Low gate input resistance 1 3 3 12 D2PAK i2PAK Description The MDmeshTM is a new revolutionary MOSFET technology that associates the Multiple Drain process with the Company's PowerMESHTM horizontal layout. The resulting product has an outstanding low on-resistance, impressively high dv/dt and excellent avalanche characteristics. The adoption of the Company's proprietary strip technique yields overall dynamic performance that is significantly better than that of similar competition's products. Internal schematic diagram Applications Switching application Order codes Part number STB11NM60T4 STB11NM60-1 STP11NM60 STP11NM60FP Marking B11NM60 B11NM60-1 P11NM60 P11NM60FP Package DPAK IPAK TO-220 TO-220FP Packaging Tape & reel Tube Tube Tube January 2007 Rev 6 1/16 www.st.com 16 Contents STP11NM60-STP11NM60FP-STB11NM60-STB11NM60-1 Contents 1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................ 6 www..com 3 Test circuit ................................................ 9 4 5 6 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 2/16 STP11NM60-STP11NM60FP-STB11NM60-STB11NM60-1 Electrical ratings 1 Electrical ratings Table 1. Symbol VGS ID Absolute maximum ratings Value Parameter TO-220/DPAK/IPAK TO-220FP Gate- source voltage Drain current (continuous) at TC = 25C Drain current (continuous) at TC=100C Drain current (pulsed) Total dissipation at TC = 25C Derating Factor 11 7 44 160 1.28 15 --65 to 150 150 2500 30 11 (1) Unit V A A A W W/C V/ns V C C www..com ID IDM(2) PTOT dv/dt(3) VISO TJ Tstg 7(1) 44(1) 35 0.28 Peak diode recovery voltage slope Insulation withstand voltage (DC) Operating junction temperature Storage temperature 1. Limited only by maximum temperature allowed 2. Pulse width limited by safe operating area 3. ISD 11A, di/dt 400A/s, VDD V(BR)DSS, Tj TJMAX. Table 2. Symbol Rthj-case Rthj-a Tl Thermal data Value Parameter TO-220/DPAK/IPAK Thermal resistance junction-case Max Thermal resistance junction-ambient Max Maximum lead temperature for soldering purpose 0.78 62.5 300 TO-220FP 3.57 C/W C/W C Unit Table 3. Symbol IAR EAS Avalanche characteristics Parameter Avalanche current, repetitive or not-repetitive (pulse width limited by Tj Max) Single pulse avalanche energy (starting Tj=25C, Id=Iar, Vdd=50V) Value 5.5 350 Unit A mJ 3/16 Electrical characteristics STP11NM60-STP11NM60FP-STB11NM60-STB11NM60-1 2 Electrical characteristics (TCASE=25C unless otherwise specified) Table 4. Symbol V(BR)DSS On/off states Parameter Drain-source breakdown voltage Zero gate voltage drain current (VGS = 0) Gate body leakage current (VDS = 0) Gate threshold voltage Static drain-source on resistance Test conditions ID = 250 A, VGS= 0 VDS = 600 V VDS = 600 V, Tc=125C VGS = 30V VDS= VGS, ID = 250A VGS= 10V, ID= 5.5A 3 4 0.4 Min. 600 1 10 100 Typ. Max. Unit V A A nA V www..com IDSS IGSS VGS(th) RDS(on) 5 0.45 Table 5. Symbol gfs (1) Ciss Coss Crss Coss eq (2) Dynamic Parameter Forward transconductance Input capacitance Output capacitance Reverse transfer capacitance Equivalent output capacitance Test conditions VDS > ID(on) x RDS(on)max, ID = 5.5A Min. Typ. 5.2 1000 230 25 100 Max. Unit S pF pF pF pF VDS =25V, f=1 MHz, VGS=0 VGS=0, VDS =0V to 480V f=1 MHz gate DC bias = 0 Test signal level = 20mV open drain VDD=480V, ID = 11A VGS =10V (see Figure 15) RG Qg Qgs Qgd Gate input resistance Total gate charge Gate-source charge Gate-drain charge 1.6 30 10 15 nC nC nC 1. Pulsed: pulse duration=300s, duty cycle 1.5% 2. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS inceases from 0 to 80% VDSS 4/16 STP11NM60-STP11NM60FP-STB11NM60-STB11NM60-1 Electrical characteristics Table 6. Symbol td(on) tr tr(Voff) tf tc www..com Switching times Parameter Turn-on delay time Rise time Off-voltage rise time Fall time Cross-over time Test conditions VDD=300 V, ID=5.5A, RG=4.7, VGS=10V (see Figure 17) VDD=480V, ID=11A, RG=4.7, VGS=10V (see Figure 17) Min. Typ. 20 20 6 11 19 Max. Unit ns ns ns ns ns Table 7. Symbol ISD ISDM(1) VSD(2) trr Qrr IRRM trr Qrr IRRM Source drain diode Parameter Source-drain current Source-drain current (pulsed) Forward on voltage Reverse recovery time Reverse recovery charge Reverse recovery current ISD=11A, VGS=0 ISD=11A, di/dt = 100A/s, VDD=100V, Tj=25C (see Figure 16) ISD=11A, di/dt = 100A/s, VDD=100V, Tj=150C (see Figure 16) 390 3.8 19.5 Test conditions Min Typ. Max 11 44 1.5 Unit A A V ns C A Reverse recovery time Reverse recovery charge Reverse recovery current 570 5.7 20 ns C A 1. Pulse width limited by safe operating area 2. Pulsed: pulse duration=300s, duty cycle 1.5% 5/16 Electrical characteristics STP11NM60-STP11NM60FP-STB11NM60-STB11NM60-1 2.1 Figure 1. Electrical characteristics (curves) Safe operating area for TO-220/D2PAK/I2PAK Figure 2. Thermal impedance TO-220 / D2PAK/I2PAK www..com Figure 3. Safe operating area for TO-220FP Figure 4. Thermal impedance for TO-220FP Figure 5. Output characterisics Figure 6. Transfer characteristics 6/16 STP11NM60-STP11NM60FP-STB11NM60-STB11NM60-1 Figure 7. Transconductance Figure 8. Electrical characteristics Static drain-source on resistance www..com Figure 9. Gate charge vs gate-source voltage Figure 10. Capacitance variations Figure 11. Normalized gate threshold voltage vs temperature Figure 12. Normalized on resistance vs temperature 7/16 Electrical characteristics Figure 13. Source-drain diode forward characteristics STP11NM60-STP11NM60FP-STB11NM60-STB11NM60-1 www..com 8/16 STP11NM60-STP11NM60FP-STB11NM60-STB11NM60-1 Test circuit 3 Test circuit Figure 15. Gate charge test circuit Figure 14. Switching times test circuit for resistive load www..com Figure 16. Test circuit for inductive load Figure 17. Unclamped Inductive load test switching and diode recovery times circuit Figure 18. Unclamped inductive waveform Figure 19. Switching time waveform 9/16 Package mechanical data STP11NM60-STP11NM60FP-STB11NM60-STB11NM60-1 4 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com www..com 10/16 STP11NM60-STP11NM60FP-STB11NM60-STB11NM60-1 Package mechanical data TO-220 MECHANICAL DATA DIM. A b mm. MIN. 4.40 0.61 1.15 0.49 15.25 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 TYP MAX. 4.60 0.88 1.70 0.70 15.75 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 MIN. 0.173 0.024 0.045 0.019 0.60 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 0.645 1.137 0.151 0.116 inch TYP. MAX. 0.181 0.034 0.066 0.027 0.620 0.409 0.106 0.202 0.052 0.256 0.107 0.551 0.154 www..com b1 c D E e e1 F H1 J1 L L1 L20 L30 oP Q 11/16 Package mechanical data STP11NM60-STP11NM60FP-STB11NM60-STB11NM60-1 TO-220FP MECHANICAL DATA mm. MIN. 4.4 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.4 10 16 28.6 9.8 2.9 15.9 9 3 30.6 10.6 3.6 16.4 9.3 3.2 1.126 .0385 0.114 0.626 0.354 0.118 TYP MAX. 4.6 2.7 2.75 0.7 1 1.7 1.7 5.2 2.7 10.4 MIN. 0.173 0.098 0.098 0.017 0.030 0.045 0.045 0.195 0.094 0.393 0.630 1.204 0.417 0.141 0.645 0.366 0.126 inch TYP. MAX. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409 DIM. A B www..com D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 O A B L3 L6 L7 F1 F D G1 H F2 L2 L5 E 123 L4 12/16 G STP11NM60-STP11NM60FP-STB11NM60-STB11NM60-1 Package mechanical data D2PAK MECHANICAL DATA TO-247 MECHANICAL DATA mm. DIM. MIN. A 4.4 2.49 0.03 0.7 1.14 0.45 1.23 8.95 8 10 8.5 4.88 15 1.27 1.4 2.4 0.4 0 4 5.28 15.85 1.4 1.75 3.2 0.192 0.590 0.050 0.055 0.094 0.015 10.4 0.393 0.334 0.208 0.625 0.055 0.068 0.126 TYP MAX. 4.6 2.69 0.23 0.93 1.7 0.6 1.36 9.35 MIN. 0.173 0.098 0.001 0.027 0.044 0.017 0.048 0.352 0.315 TYP. MAX. 0.181 0.106 0.009 0.036 0.067 0.023 0.053 0.368 inch www..com A1 A2 B B2 C C2 D D1 E E1 G L L2 L3 M R V2 3 1 13/16 Packaging mechanical data STP11NM60-STP11NM60FP-STB11NM60-STB11NM60-1 5 Packaging mechanical data D2PAK FOOTPRINT www..com TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. A B C D G N T 1.5 12.8 20.2 24.4 100 30.4 26.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0795 0.960 1.039 3.937 1.197 BULK QTY 1000 inch MIN. MAX. 12.992 TAPE MECHANICAL DATA DIM. A0 B0 D D1 E F K0 P0 P1 P2 R T W mm MIN. 10.5 15.7 1.5 1.59 1.65 11.4 4.8 3.9 11.9 1.9 50 0.25 23.7 24.3 MAX. 10.7 15.9 1.6 1.61 1.85 11.6 5.0 4.1 12.1 2.1 inch MIN. MAX. 0.413 0.421 0.618 0.626 0.059 0.063 0.062 0.063 0.065 0.073 0.449 0.456 0.189 0.197 0.153 0.161 0.468 0.476 0.075 0.082 1.574 0.35 0.0098 0.0137 0.933 0.956 BASE QTY 1000 * on sales type 14/16 STP11NM60-STP11NM60FP-STB11NM60-STB11NM60-1 Revision history 6 Revision history Table 8. Date 09-Sep-2004 10-Jun-2005 26-Jul-2006 Revision history Revision 1 2 3 4 5 6 First Release Typing error, wrong description The document has been reformatted, no content change Typo mistake on order code Various changes on "Test conditions" for Table 5. and Table 6. Order code has been corrected Changes www..com 31-Aug-2006 21-Dec-2006 12-Jan-2007 15/16 STP11NM60-STP11NM60FP-STB11NM60-STB11NM60-1 www..com Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 16/16 |
Price & Availability of P11NM60 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |